CO2, Temperatur, Fugt sensor med RGB LED
3.850,00 kr. – 4.398,00 kr.
• Bus-powered CO2, temperature and humidity sensors• Wall mounting• CO2 measuring range: 0 to 2000 ppm• Temperature measuring range: -20 to 50 °C• Humidity measuring range: 0 to 100 %RH Only SHSUCOTHL• “Traffic light LED indication” for CO2 level• Low current consumption• Easy installation• Smart Dupline® protocol
- Beskrivelse
- Yderligere information
- DATA, MANUAL og software SHSUCOTL
- DATA, MANUAL og software SHSUCOTHL
- Anmeldelser (0)
• Bus-powered CO2, temperature and humidity sensors
• Wall mounting
• CO2 measuring range: 0 to 2000 ppm
• Temperature measuring range: -20 to 50 °C
• Humidity measuring range: 0 to 100 %RH Only SHSUCOTHL
• “Traffic light LED indication” for CO2 level
• Low current consumption
• Easy installation
• Smart Dupline® protocol
Product Description
The SHSUXXXXL line are bus-powered room sensors for wall-mounting. They are available in different combinations of CO2, temperature and relative humidity. The sensors have a “traffic light” LED which is used to indicate the CO2 level in green, amber or red colour. The only connection needed for the sensor is the Dupline® 2-wire cable. Several sensors can be multi-dropped via the same Dupline® 2-wire bus, thereby simplifying the wiring to the controller significantly. The address assignment and definition of CO2 threshold levels are performed over the bus by using the SBWEB/SHWEB PC-based programming tool.
RGB LED
By means of the SBWEB/SHWEB configuration tool it is possible
to set the CO2 thresholds (green to yellow and yellow
to red) to automatically light the LED in green, yellow or red
colour depending on CO2 level.
| Vægt | 200 g |
|---|---|
| Vægt | 150 g |
| Fejlsikker tilstand | Hvis SH2MCG24 mister kommunikationen med SH2WEB24, slukker Dupline®- udgangen. I den situation vil alle moduler der er tilsluttet bussen gå i den fejlsikre tilstand der er programmeret individuelt med |
| Tæthedsgrad | IP20 |
| Beskyttelsesgrad | 2 (IEC 60664-1, par. 4.6.2) |
| Driftstemperatur | -20 to +50°C (-4 to +122°F) |
| Lagertemperatur | -40 to +70°C (-40 to + 158°F) |
| Fugt (ikke kondenserende) | 0 til 90% Rh |
| Datablad / Manual | Download datablad / Manual – Klik på fane Download |
| Dimension | (h x w x d) 80 x 90 x 26 mm |
| Farve | |
| Information | Temperature Signal range -20 to 50 °C |
| Adressetildeling | Automatisk. igennem "SIN" (Specifikt Identifikations Nummer) UWP 3.0 og Sx2WEB24 |
| Strømforsyning | |
| Information 2 | Temperature Signal range -20 to 50 °C Inaccuracy +/-0,5°C |
| Til Controller | UWP 3.0 – SH2WEB24 – SB2WEB24 – SA2WEB24 – UWP 4.0 |
| ean13 | 8030956070934 |
| Produkt Valg | CO2, Temperatur sensor med RGB LED, CO2, Temperatur, Fugt sensor med RGB LED |
| Sensor Version | CO2 og Temperatur, CO2, Temperatur med RGB LED, CO2, Temperatur og fugtighed, CO2, Temperatur, Fugt sensor med RGB LED, Temperatur, Temperatur og Fugtighed |
DATA, MANUAL og software SHSUCOTL
DATA, MANUAL og software SHSUCOTHL
Kun kunder, der er logget ind og har købt denne vare, kan skrive en anmeldelse.
Relaterede varer
Anmeldelser
Der er endnu ikke nogle anmeldelser.