SB2WEB24 er til Kontor og større bygninger

SB2WEB24 er en programmerbar, integreret enhed specielt udviklet til automatisering af hjemmet. Kontrollerens funktioner er dedikeret
til automatisering, så som styring af lys, tempe ratur og persienner, alarm overvågning, energiovervågning osv. …

BACnet Controller for HVAC and lighting systems

Effektiv Bygnings Automation !

Med nøgleord som BACnet, Dali, ModBus, Dupline 2 leder bus system, fri topologi med bus powered moduler,  fleksibilitet, og reducerede installations omkostninger på op til 50% i forhold til andre intelligente installationer, er Carlo Gavazzis SmartBuilding system en stærk partner i Bygnings Automation.

SmartBuildings 2 ledede bus installation giver mange fordele i Bygnings Automations installationer, med total fri topologi, ingen brug af skærmede kabler, og bus forsynede moduler, fjerner nødvendigheden af ekstra strømforsyninger, og komplicerede understationer, og bliver dermed en stærk pris bevidst DDC kontroller.

Med indbygget BACnet interface er interfacet mod overordnede CTS anlæg sikret, og med alle I/O og data punkter automatisk konverteret over på BACnet interfacet er alle data tilrådighed på BACnet, også for ændring af opsætning i eks. PIR sensorer fra CTS siden.

DALI Master modul til håndtering af 63 balaster i 16 grupper, uden brug af ekstra software og ingen ekstern programmering letter installations opgaven betydelig.

Tavle moduler med indbygget energi måling samt muligheden for at tilslutte energi målere, bliver systemet en stærk platform til overvågning og logning af energi og pro aktiv optimering.

Product Description

The SB2WEB24 programmable BACnet Controller is the brain and central unit in Carlo Gavazzi’s integrated concept for HVAC and lighting control in smart buildings. On one hand the SB2WEB24 can manage the complete lighting control system based on Dupline® sensors/actuators and DALI actuators, and on the other hand it can operate as Dupline® – BACnet/IP gateway thus allowing DDC controllers to use Dupline® I/O modules and sensors as decentralized I/O via BACnet objects. The SB2WEB is also able to operate as Modbus/ TCP slave. The SB2WEB provides functions for control of lighting, blinds, temperature, logic, scheduling, sequencing, alarms and data logging. The functions can be controlled, monitored and operational parameters changed via BACnet objects. The SB2WEB24 can manage data points from up to 7 Dupline® networks, each driven by a Dupline® Master Channel Generator (SH2MCG24) connected via the right side connector or via an external RS485 link. Only Dupline® modules supporting the Smart Dupline® protocol can be used. The SB2WEB24 is also equipped with an RS485 port for communication with CG energy meters. All electrical parameters from the energy meters are made available as BACnet objects. Via the PC-based configuration tool the user defines which modules are connected to the SB2WEB24 and the SH2MCG24s and the unique SIN-address for each Dupline® module is entered. Subsequently the configuration tool will automatically configure all connected Dupline® modules via the bus, and create the relevant BACnet objects.

Mode of Operation

The SB2WEB24 BACnet gateway needs to be configured to become operational. When the SB2WEB24 is connected to the TCP/IP network, the user can scan the system via the PC-based configuration tool to discover all Dupline® and DALI modules connected. It is also possible to enter the modules manually in offline mode. Each Dupline® module has a so-called SIN address (printed on the packaging and on the module) which must be entered during the configuration process to provide a unique identification of the item. Subsequently, the tool will automatically configure the connected Dupline® modules over the bus. Once all modules with data points have been defined, it is possible to define the functions that use them. Some of the functions are predefined (e.g. lighting, alarm, temperature) with inputs, outputs and operational parameters, while others are standard types, such as logic, timers, real-time, sequence, data logging etc. In order to ease testing and troubleshooting during commissioning, the configuration tool also provides the option to monitor live data from the SB2WEB24. All physical data points in the system are automatically made available as BACnet/IP objects, thus making it easy for external DDC controllers to use them as a remote I/O. In addition, BACnet objects are created that allow monitoring and control (trigger) of the functions, as well as changing operating parameters (e.g. lux set-point for constant light function).